The problem solver - the specialist!
Regardless of whether adhesive residue, old vignettes, Farbest on the ground, graffiti on car paint or .....where other "special cleaners" fail, try the problem solverand it will put a smile on your face ...
directly to the shop
The OGM problem solver efficiently removes residues from dried and non-chemically curing adhesives and sealants, tapes, foils, stickers and labels as well as from greasy, oily dirt, tar residues, rubber abrasion, nicotine coatings and construction foam (not hardened).
It loosens graffiti and paint residues from smooth surfaces. The product removes stubborn dirt from metals, aluminum alloys, stainless steel, glass, ceramics and plastics.
Due to the slight loosening of the weathered surface, it is re-sealed and smoothed at the end of the cleaning process, which counteracts new soiling.
application:
New cleaning process:
Depending on the degree of soiling, allow the sprayed / applied cleaner to take effect for between 5 and 30 seconds. Make sure that the sprayed surface does not dry out.
If the surface dries on when it is used or becomes sticky when wiped off, spray cleaner!
Use a normal paper towel to wipe off the dirt and wipe it only once over the dirty surface! Possibly. spray lightly!
Now the coarsest dirt is in the paper towel, which must be disposed of.
In no case use a dirty cloth again, as otherwise the dirt will be worked into the surface to be cleaned.
If necessary, repeat the process in the case of heavy soiling. In the last step, apply cleaner again and lightly “polish” the surface in circular movements.
It is important for both cleaning and final “polishing” that the surface to be cleaned is always well moistened with cleaner.
After completion, dry the cleaned area well and let it air out.
The surface may be slightly sticky until it is completely dry.
If necessary, restore the gloss of lacquered surfaces with normal polish.
Always check material compatibility in an inconspicuous place.
