Special cleaner for removing lichens, moss, algae, green growth and environmental pollution down to the pores
With this cleaner you will immediately see the success
directly to the shop
Excalibur Roof & Facade Cleaner penetrates deep into the dirt in the pores. After a short time the contained "foaming" activates and drives the dirt to the surface.
Excalibur roof and facade can of course also be used on any stone surface such as courtyard entrances, terraces or stone walls for instant cleaning down to the pores.
- Roof surfaces made of clay, stone, slate, cement substitute, plastic, painted sheet metal, etc.
- Facades made of plastic plaster, mineral plaster, paint, etc.
- all stone surfaces such as terrace, paving, stone and natural stone, marble, granite, etc.
Area of application - use as long-term cleaner (only spray on)
- Roof surfaces made of clay, stone, slate, cement substitute,
Challenge
Conventional cleaners only work on the surface. The deep-seated dirt, algae, lichens and roots remain in the stone pores. High-pressure cleaning with a dirt blaster destroys the surface and only "cuts off" the head of the vegetation. This gives the roots more light and more water. The surface of the stone is gradually destroyed and roughened by the dirt grinder. This increases the surface area and, thanks to the roughened structure, provides even more support for new growth.
Excalibur roof and facade, on the other hand, work from the inside - it penetrates the dirt into the pores and activates a frother there, which transports the dirt to the surface.
Excalibur roof and facade cleaner also removes old coatings from "nano sealing" from other manufacturers. It even makes oil stains pale after repeated use.
After treating your area, it is as if it were cleaned pore-deep. We recommend protecting the surface from new infestation 2-3 days after cleaning with Excalibur Roof & Facade with our impregnation protection.
application:
Apply Excalibur Roof & Facade evenly to the surface with a sprayer.
After a short time, a foam layer from loosened vegetation forms. After approx. 20 minutes (do not allow to dry - if necessary keep moist with water mist) the surface can then be washed off with a scrubber and plenty of water.
For larger areas, we recommend a standard household high-pressure cleaner with which the area is "swept away" with the flat jet nozzle and little pressure.
Excalibur Roof & Facade continues to have an effect 1-2 days after cleaning,whereby any remaining "shadows" disappear automatically.
If you do not want to rewash manually, Excalibur can also be used as a long-term cleaner. Simply apply cleaner and let it dry. The rest is done by the environmental influences, which remove the dead material piece by piece. Not recommended for walkable surfaces and facades.
Admission / mandatory information:
Can be corrosive to metals. Causes severe skin burns and eye damage.Harmful to aquatic life with long-term effects. Keep out of the reach of children. Avoid release to the environment. Wear protective gloves and eye protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin with water or take a shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove any existing contact lenses if possible. Continue rinsing. Call a POISON CENTER, doctor immediately. Collect spillage to prevent material damage. Send contents / container to a collection point for hazardous waste or special waste. Develops toxic gases on contact with acids. DANGER: ROOF & FAÇADE CLEANER Contains: Sodium hypochlorite solution Ingredients labeling: Chlorine-based bleach ≥5% - <15%
The frother activates and presses all vegetation to the surface
When the work is done you will have a new roof - of course the Exkalibur roof & facade cleaner can also be used on all paved surfaces, natural stone, tile and granite. or marble coverings can be used around the house when deep-seated dirt needs to be removed quickly.
Example:
White marble basement exit - 3 specialist companies said the area could no longer be saved.
Our Exkalibur Roof & Facade was used - but it had to be applied twice for this area.
