Inflatable boat and fender cleaner
The revolution - test winner in every test, e.g. boats 2/2019
For inflatables and fenders
directly to the shop
you just have to try it - 100% customer satisfaction!
Challenge
see for yourself - the video says more than words ...
application:
APPLICATION:
Inflatable boat & fender cleanerEXTREME
Areas of application:
For cleaning and removing dirt, soot and oil residues, sticky buildup on fenders and tarpaulins as well as removing adhesive residues from labeling foils and stickers. Graffiti from and GRP surfaces such as tree resin stains and fine paint scratches can also be removed without using abrasives.
Properties:
OGM-BOATCLEANER Fender Cleaner cleans and closes (depending on the age and condition of the subsurface) the porous surface by slightly loosening the weathered surface, thereby resealing it.
This makes the surface more resistant to new soiling and regains its suppleness.
Due to the functional principle of OGM-BOATCLEANER Fender Cleaner, the weathered, rough surface is smoothed again, which results in a very strong, dirt-repellent effect.
For painted objects (e.g. fender tips, sprayed labels on the inflatable boat)
Please note that OGM Fender Cleaner Extreme removes the paint!
Please note:
Because of the way OGM Fender Cleaner Extreme works
it is important to use the exact working technique.
Application of the cleaner:
To apply the OGM Fender Reiniger Extreme cleaner to larger areas, use a hand spray bottle or a finger atomizer.
Wet a paper towel for small areas.
Cleaning process:
Depending on how dirty it is, allow the sprayed cleaner to take effect for between 5 and 30 seconds.
Make sure that the sprayed surface does not dry out.
Use a normal roll of paper / paper towel to wipe off the dirt.
Before wiping off, make sure that the dirty area is well moistened with cleaner.
Possibly. spray lightly!
Now wipe the dirty surface only once with a clean paper towel!
Now the coarsest dirt is in the paper towel which has to be disposed of.
In no case wipe the surface again with a dirty cloth, otherwise you will bring the dirt into the surface of the surface to be cleaned.
Now spray a thin layer of cleaner and immediately wipe with a new, clean cleaning cloth.
If the dirt is seized in, allow the cleaner to work again.
When the surface is clean, the last step can be used
Apply cleaner again and "polish" the surface in circular movements.
It is important for both cleaning and subsequent “polishing” that the surface to be cleaned is always moist.
As soon as the surface becomes sticky when you wipe it, the cleaning cloth must be moistened more or cleaner must be applied!
After completion, dry the cleaned area well and let it air out.
The surface may be slightly sticky until it is completely dry.
Processing tips:
-Work partial areas, from top to bottom
- when removing graffiti on paint or shiny surfaces
polish with a fine polish after cleaning and drying
- when removing adhesive letters, cover foil beforehand if necessary
manually peel off and then glue residue as described
remove
- Let the Fender Cleaner work in with paper stickers until they work
the sticker can be easily peeled off, then remove the adhesive residue
Always check material compatibility in an inconspicuous place on the sample area.
Use only in well-ventilated places!
Safety instructions:
The usual rules for handling chemicals apply: wear safety glasses, gloves and protective clothing.
In the event of contact with skin or eyes, rinse or rinse affected areas immediately with plenty of cold water.
Ensure good ventilation when working in closed rooms.
Do not eat, drink or smoke during processing.
